After learning how to design a printed circuit board through PCBExpress’s detailed Getting Started guide, I was able to make my own printed circuit board. This board was designed to cut down on a lot of the seemingly random errors/failures…
Uncategorized
Soldering the Extra Components
by blice •
Soldering was by far the most difficult part of this project, so I am going to try to give you as detailed a plan as possible so that you can avoid making the same mistakes that I made. First of…
Uncategorized
Creating the PVC housing
by blice •
We bought schedule 80 dark grey PVC from McMaster-Carr to create the housing. The parts consisted of a female end cap with NPT, a 1 foot section with male NPT on one side, a 3 foot section with male NPT…
Uncategorized
Arduino and Sensors
by blice •
Here is a side down view of all of the electronics for this project.
And here is a top down view of the same.
Uncategorized
Current boards and Setup
by blice •
Our current setup has a GSM shield, SD shield, Arduino Mega, Proto board, RTC, conductivity sensor, pressure sensor, and two thermistor’s. Let’s work from the ground up; since this project brings together many different components, a lot of libraries and…
Uncategorized
Introduction to the REOL Project
by blice •
Over the past year we have been working on an Arduino based conductivity, depth, and temperature sensor which can be deployed in remote locations. It is currently still in development, but we decided that it would be a good idea…